Galvanised Stump Brace Plate

Brace your house stumps without the welder. Save on welding, time and labour.

This hot dip galvanised stump brace plate gives you a simple way to cross-brace steel stumps and posts. Tek-screw a plate onto each stump at the angle you need, run threaded rod between them, and tighten a nut on the outside of each plate. Tension the run with a turnbuckle and you're done. Fully engineered and certified to 3-tonne bracing pressure. Certifications available on request.

It's made for M16 threaded rod. Because the nut on the outside does the holding under tension, smaller rod or bracing cable can be used too.

Build a full cross-bracing run from parts:

• Stump brace plates – one at each end of each brace
• Galvanised Threaded Rod – the brace itself
• Stub End Turnbuckles – to pull the brace tight
• Galvanised Joining Nuts – to extend the rod for longer runs

Features:

• Fully engineered and certified to 3-tonne bracing pressure (certifications available on request)
• Screws onto steel stumps with self-drilling tek screws, so no welding needed
• Made for M16 threaded rod; also suits smaller rod or bracing cable
• 40 x 3mm flat mild steel, hot dip galvanised
• 6.3mm screw holes
• Sold each

Common applications:

• Cross-bracing steel house stumps and posts
• Subfloor bracing under decks, verandahs and raised floors
• Restumping jobs

Need a hand picking the right one? Drop us a line here or give us a buzz on (07) 5371-0160. We're here to help.